Quick heating high temperature induction melting furnace for metals

Specification

Description

Main technical parameters for this complete set of equipment:

• Furnace body structure: vertical type

• Pouring and casting type: flip type

• Nominal capacity: 0.5-25kg (based on steel)

• Crucible smelting temperature:2200

• Degree of limiting vacuum: 6×10^(-3)pa(cooling state)

• Vacuum leaking rate: less than 5pa/h

• Nominal power of smelting power supply: 60KW

• Nominal frequency of smelting power supply: 1000Hz

• Rotating method: motor-driven

• Feeding method: top feeding

• Discharge method: furnace top discharge

• Electric power consumption: 650kw.h/t

• Water consumption: 2t/h

• The vacuum leak rate: ≤ 5pa/h

• Working atmosphere in the furnace: Vacuum/ Ar

Middle frequency power supply using condition:

• Sea level: no less than 4000 meters

• Ambient temperature: +40 to -2

• Air relative temperature: less than 80%

• The equipment shall be installed indoor without conductive dust or errosive gas.

• Cooling water: 1-2mg/cm²

Application

This complete equipment is used for the smelting and precise casting for copper-based material, Chromium-based material, Cobalt-based material, precise alloy, high temperature alloy as well as magnetic material.

Competitive Advantage

• Full digital control which can achieve power factor calibration, constent power control, temperature control, frequency tracking, zero power start-up, voltage and current closed-circle control, real-time monitor on over-heat, over-voltage, over-current;

• Optimum heating current frequency, extending the lifetime of the crucible; Global leading induction heating system, stable & reliable;

• Precise control of heating energy, meeting the requirements for various heating technologies;

• Smelting under high power factor, quite low harmnoic interference on the power source;

• Rapid speed of smelting, no loss of any composition of the noble metal;

• Reliable monitoring of pressure on water of the system, flow rate and temperature;

• Safe operation, easy match, convenient adjustment, and wide loading scale.

• 2 watching windows set on the furnace lid is more convenient for watching the inside situation and measure temperature.

• Quick speed of smelting.

• Good energy-saving effect.

• Comfirmity in metal components.

• Less burning loss.

• High speed of temperature rising.

• Easy for temperature control.

• Wide frequency use scope: suitable for 1000Hz to 40000Hz induction heating.

Detailed Image: